The versatile solution
Vylon Plus is a homogeneous vinyl floorcovering suitable for use in commercial areas. Available in sheet and tile form. A versatile pattern in 18 fresh colourways. Vylon Plus is equipped with a factory finish for initial protection.The factory finish also provides a base for future maintenance procedures. Tar ... View more The versatile solution
Vylon Plus is a homogeneous vinyl floorcovering suitable for use in commercial areas. Available in sheet and tile form. A versatile pattern in 18 fresh colourways. Vylon Plus is equipped with a factory finish for initial protection.The factory finish also provides a base for future maintenance procedures. Tarkett has substituted traditional plasticizers with a new generation of non-phthalate plasticizer in the production of Vylon Plus, as with all our homogeneous flooring. Vylon Plus is recommended for use in areas such as schools, shops, healthcare facilities, social housing and other similar areas. View less
- Factory-applied surface finish
- Sheets and tiles in different formats
- Coordinated colour range
- VOC emissions below quantifiable level and phthalate free
|Light fastness (EN ISO 105-B02) - Level||≥ 6|
|Reaction to fire||Bfl-s1|
|Electrical behaviour - body voltage (EN 1815) - kV||< 2|
|Thermal resistance (EN 12667) - m² K/W||Approx. 0.01|
|Thermal conductivity||Approx. 0.01|
|Bacteria resistance (EN ISO 846 Part C)||Does not favour growth|
|Flexibility (EN 435 Method A) - mm||Confirm|
|Total thickness (EN 428)||2 mm|
|Wear layer thickness (EN 429)||2 mm|
|Total weight (EN 430)||3.7|
|Residual indentation (EN 433) - mm||≤ 0.10 (Average measured value: 0.04 mm)|
|Description (EN 649)||ISO 10581: Homogeneous single layered vinyl flooring. Type II.|
|Classification - commercial (EN 685) - Class||34|
|Classification - industrial (EN 685) - Class||43|
|Production plant address||Tarkett AB S-372 81 Ronneby Sweden|
TARKETT’S BALANCED CHOICE The Plus range is part of Tarkett’s choice of sustainable solutions. It is an integrated system that allows for balancing all the competing needs, while making choices that are truly sustainable and work together aesthetically.
Better Raw Materials Tarkett’s Plus products are based on up to 75% natural raw material, such as salt and mineral fillers. We use local suppliers as far as we can to reduce the environmental impact from transportation.
Resource Stewardship Tarkett’s Plus range is produced in Ronneby , Sweden. The factory has an environmental system (ISO 14001) and has continuously reduced its environmental impact since 2003: 54% reduction of total amount of waste produced in the factory 60% reduction of VOC emissions. The factory manages water consumption via a closed loop and 53% of the energy used comes from renewable sources (hydro power, wind power, bio fuels) As for all Tarkett sites, the Ronneby site is assessed from an environmental point of view by an external auditor every two years. No risks were identified in the Ronneby site during 2009.
People-friendly Spaces Tarkett’s Plus range delivers valuable health, hygiene and welfare benefits: PUR surface treatment for low-maintenance properties. Very low VOC emissions – 30 μg/m3 at 28 days – more than 30 times below demands in European Standard (1000 μg/m3 ), contributing to good indoor air quality.
Reuse and Recycle Tarkett was one of the first flooring companies to recycle post-production waste and remains the industry leader. During 2008, 411 tons of flooring material was collected through out Europe and recycled at the Ronneby site. The IQ range produced at Ronneby on average contains: 25,5% combined post-production/post-installation waste The use of post production material has increased by 26% since 2003 ISO 14001 certificate n°2000-SKM-AQ-886 ISO 9001 certificate n°2000-SKM-AE-255